VIII. Technical Specifications
i. Set the probe compensation at x10 for physical probe;
ii. Under suitable operation temperature, work the device for 30+ minutes without interval;
iii. Provided the environment temperature gets 5 degrees more, or less, to self-calibrate the device
through Utility menu, via “Self Cal” option (please refer to Self Cal).
The following technical specifications been measured on the basis of above-mentioned operations,
Oscilloscope Part -
Vertical Resolution (A/D)
8 bits / 12 bits / 14 bits
sample, peak detect, average
1 MΩ ± 2%, in parallel with 15 pF ± 5 pF
To Next Page
Loading...
