Owon 4-CH VDS6000 Series User Manual

３０
automatic measurement options towards voltage value
10 options involved: Vpp, Vmax, Vmin, Vavg, Vamp, Vrms, Vtop, Vbase, Overshoot and Preshoot.
Following illustration to assist better understanding different measurement options,
Definitions about these options -
Vpp
voltage between upper peak and lower peak from measured signal
Vmax
voltage between upper peak and ground (GND)
Vmin
voltage between lower peak and ground (GND)
Vamp
voltage between flat top and flat base from measured signal
Vtop
voltage between flat top and ground (GND)

Owon 4-CH VDS6000 Series Specifications

General

Brand	Owon
Model	4-CH VDS6000 Series
Category	Test Equipment
Language	English