to work WiFi with PC software through device station
The target PC should support WiFi communication, and the optional WiFi module should be inserted into USB host
communication interface.
i) to set device’s network via “Network” button under “Utility” option
a. to communicate device with target PC through USB connection cable via suitable USB communication
interface, after the communication successful (please refer to iv. to communicate the device with PC
under V. How to Communicate Device with PC), press “Network” button under “Utility” option from
function menu.
b. in “Network”, mouse-click “WiFi Setup” to “WiFiSetting” choose “STA” as “Connect Type”, to set “SSID”
and “Password”, “Port” here use 8866 (could be any value, ranging from 0 till 65536).
c. input correct “SSID” and “Password” from WiFi router, here we use one available WiFi router - SSID in
OWONTM, Password in lilliputowon, press “OK” to confirm the setting, after the step, “WiFiSetting” menu
will be off. Re-enter “WiFiSetting” menu, press “Refresh” to update the IP address.
To Next Page
Loading...
