Owon AG4101 - To Set the Duty Cycle

5.Front Panel Operation
Parameter bar 1
Setting menu of
Square signal
Amplitude
Load
Offset
Parameter bar 2
Current signal
Duty cycle
Frequency
Current parameter
Figure 5-3: The User Interface of Square Signal
Term Explanation
Duty Cycle:
The percentage that the High Level takes up the whole Period.
To Set the Duty Cycle
(1) Press F4 button, the "Duty" menu item is highlighted, the current value of the
Duty cycle is displayed in Parameter bar 1.
(2) Turn the knob to change the value directly;
or press the number keys to input the desired value, press F4 to choose "%".
For a frequency ≤25MHz, the Duty cycle range is 20%～80%. For a frequency greater
than 25MHz, the Duty cycle is 50%.
Parameter bar
1
Duty cycle
Input box
Current parameter
Duty cycle
Figure 5-4: Set the Duty cycle of Square signal
13