Accesses the marker control keys that
select the type and number of markers and
turns them on and off.
Accesses the marker function softkeys that
allow you to set other system parameters
based on the current marker value.
Accesses the menu of special functions,
such as marker noise, N dB bandwidth
measure and frequency counting.
Accesses the softkeys that let you make
transmitter power measurements such as
ACPR(adjacent channel power), channel
power, and OBW(occupied bandwidth), etc.
Sets the parameters for the selected
measurement function.
Sets the system parameters, and accesses
the calibration menu.
Accesses the softkeys that allow you to
configure the file system of the analyzer.
Resets the analyzer to the factory settings,
user state or Last off state. This state can
be specified in 【System】→
[PowerOn/Preset►]→[Preset►].
Quickly save screenshots, trace data, and
user status
Save/recall screenshots, trace data, user
status
Press the Help key to activate the help
system. Press the Help key again to exit.
To Next Page
Loading...
