Owon XSA800 Series - Page 45

5.Menu Interpretation
40
5.12.1 [DEMOD►]
Enter Audio Demod soft menu.
5.12.1.1 [Demod On Off]
Turn audio demodulation on or off.
5.12.1.2 [Demod Mode►]
Enter the demodulation mode soft menu. Including FM, AM.
5.12.1.3 [Sound]
When the audio demodulation is on, adjust the speaker output
volume.
5.12.1.4 [RadioSet►]
Quick access to the common broadcast band.
5.12.1.5[Return]
Return to the previous menu.
5.12.2 [Analog Demod►]
Enter the digital demodulation soft menu.
5.12.2.1 [AM►]
Enter AM demodulation soft menu.
5.12.2.1.1 [AM On Off]
Turn AM demodulation On or Off.
5.12.2.1.2 [Carrier Freq]
Set the carrier frequency of the AM modulation signal.
5.12.2.1.3 [IF BW]
Set the demodulation bandwidth of the AM modulated signal.
5.12.2.1.4 [Data Reset]
Set the maximum, minimum, and average data reset under the AM
modulated signal.
5.12.2.1.5 [Setup►]