Palm Tungsten Tungsten T Handhelds User Manual

Chapter 12 Using Phone Link
126
To configure Bluetooth settings for your phone connection:
1. Place your phone into the mode where it can accept Bluetooth pairing from
another device. See the documentation that came with your phone for details.
2. Wait for your handheld to discover your phone.
When your handheld discovers a Bluetooth phone, it displays a screen similar
to the screen that follows.
3. Select your phone from the list.
If your phone doesn’t appear on the list, tap Find More, and select your phone’s
name when it appears on the list.
4. Tap N ex t.
Your handheld connects to your phone.
5. When prompted to create a trusted connection, tap Next.
6. Enter a passkey for this connection on your phone, and then tap OK.
A passkey is a unique identifier that enables secure data exchange between two
Bluetooth-enabled devices that have formed a connection with one another. The
passkey is stored on both devices. If Phone Link is unable to validate the same
passkey on both your handheld and your phone, an error message appears and
you are given the option to try connecting again. If you need additional
information about connecting your phone, refer to the Phone Pairing Handbook
for Palm™ Tungsten™ T Handheld at
www.palm.com/support
.
7. When prompted, to create a trusted connection, tap Next.
8. Enter a passkey for this connection on your handheld, and then tap OK.

Palm Tungsten Tungsten T Handhelds Specifications

General

Brand	Palm
Model	Tungsten Tungsten T Handhelds
Category	Handhelds
Language	English