Palm Tungsten Tungsten T Handhelds User Manual

Chapter 17 Setting Preferences for Your Handheld
192
5. Tap the Numbers pick list, and select formats for the decimal point and
thousands separator.
6. Tap Don e.
Power Preferences
The Power Preferences screen enables you to set power consumption options. You
can control when your handheld turns on or automatically turns off, and whether
to receive beamed information.
Auto-off after
Your handheld has an automatic shutoff feature that turns off the power and
backlight after a period of inactivity. This feature helps conserve battery power in
case you forget to turn off your handheld.
If you find that your handheld shuts itself off before you finish reviewing the
information on the screen, you can increase the time setting of the automatic
shutoff feature.
To set the Auto-off after interval:
1. From the General Preferences screen, select Power.
2. Tap the Auto-off after pick list.
3. Select the setting you want to use for the automatic shutoff feature: 30 seconds,
1 minute, 2 minutes, or 3 minutes.
4. Tap Don e.
Stay on in Cradle
You can choose to leave your handheld on when it is in the cradle/cable, so you
can continue to view your data. By default, your handheld remains on when in the
cradle/cable and connected to a power source.
To change the cradle/cable setting:
1. From the General Preferences screen, select Power.
2. Tap the Stay on in Cradle pick list.

Palm Tungsten Tungsten T Handhelds Specifications

General

Brand	Palm
Model	Tungsten Tungsten T Handhelds
Category	Handhelds
Language	English