Palm Tungsten Tungsten T Handhelds User Manual

Locating handheld components
13
Using the backlight
If lighting conditions make it difficult for you to see the information on your
handheld, you can adjust the brightness of the screen backlight or turn it off. The
backlight remains on until you turn it off. Turning the backlight off conserves
battery power.
To adjust the brightness of the backlight:
1. Tap the Brightness icon in the upper-right corner of the Graffiti writing area.
2. Tap the Enable Backlight check box to select it.
3. Drag the slider to adjust the brightness.
TIP
You can also press Up or Down on the navigator to adjust the brightness.
4. Tap Don e.
To turn the backlight on and off:
■ Press and hold the power button for about two seconds or until the backlight
turns off or on.
TIP
In addition, you can assign the full-screen pen stroke to activate the
backlight. See “Pen preferences” in Chapter 17 for details.
Locating back panel components
Universal
connector
Reset
button
Attach
points

Palm Tungsten Tungsten T Handhelds Specifications

General

Brand	Palm
Model	Tungsten Tungsten T Handhelds
Category	Handhelds
Language	English