Palm Tungsten Tungsten T Handhelds User Manual

Conducting cradle/cable HotSync operations
163
If you are a system administrator preparing several handhelds for a group of users,
you may want to create a user profile. See “Creating a user profile” later in this
chapter before performing the following steps.
IMPORTANT
You must perform your
first
HotSync operation with a local, direct
connection or with infrared communication, rather than with a modem or network.
The following steps assume that you have already installed Palm Desktop
software. If you have not installed this software, see “Step 4: Install software” in
Chapter 1 for instructions.
To perform a local HotSync operation on a Windows computer:
1. Place your handheld in the cradle/cable.
2. If the HotSync Manager is not running, start it: On the Windows desktop, click
Start, and then select Programs. Navigate to the Palm Desktop software
program group, and select HotSync Manager. Alternatively, you can start the
Palm Desktop software, which automatically opens the HotSync Manager.

Palm Tungsten Tungsten T Handhelds Specifications

General

Brand	Palm
Model	Tungsten Tungsten T Handhelds
Category	Handhelds
Language	English