Chapter 16 Performing HotSync
®
Operations
166
To perform a local HotSync operation on a Mac computer:
1. Place your handheld in the HotSync cradle/cable.
2. Make sure that HotSync Manager is enabled: Double-click the HotSync
Manager icon in the Palm folder. Click the HotSync Controls tab, and make sure
the Enabled option is selected.
3. Press the HotSync button on the cradle/cable.
The HotSync Progress dialog box appears, followed by the Select User
dialog box.
4. In the Select User dialog box, select the user name you entered when you
installed the Palm Desktop software, and click OK.
To Next Page
Loading...
