palmOne 1035NA - Making Connections from Contacts; Using Quick Connect

Tungsten™ T5 Handheld 130
CHAPTER 6 Managing Your Contacts
Making connections from Contacts
You can set up your contacts so that you can do tasks like dialing a phone number; creating an
email or text message; accessing the web; or sending an instant message (requires additional
software, sold separately) directly from a contact screen. Contacts gives you two tools to perform
these tasks:
Quick Connect Lets you select a connection type and opens the application for making that type
of connection directly from a contact’s information screen.
Tap-to-Connect Opens the application to perform a connection task directly by selecting the
appropriate entry (phone number, email address, and so on) from a contact’s information screen.
Using Quick Connect
If you have a compatible mobile phone (sold separately) that includes Bluetooth technology, you
can use Quick Connect to dial a phone number; address an email or a text message, go to a
website, or send an instant message (requires additional software, sold separately) directly from a
contact.
0
1 Press Contacts .
Continued
Before You Begin
[ ! ]
You must complete all the
prerequisites for the
email and messaging
applications.
To use Quick Connect
with your handheld’s
built-in Bluetooth
technology, you must set
up a phone connection.
To use it with your
handheld’s IR port, run
Phone Link Updater
, and
then use the Phone Link
application to set up a
phone connection.