X1 Mode Programs MANAGER OPERATIONS
Starting Order #
If you use order numbers instead of check numbers, you can use this X1 program to
change the current number. Order numbers begin at #1 and increase, until they roll over
at #99. To change the current number, use the following procedure at the start of the day.
Note: Repeat these steps at each workstation with an Order # you want to change.
1. Turn your keylock to MGR Mode.
2. Select the X (& PRGM) option. The screen displays the X1 Mode menu, shown
below. If "Enter Manager" displays, you must enter your manager number before
continuing.
1 CASH
1 STOREWIDE REPORT 11:15 LVL1 MGR
2 TERMINAL REPORT *** X1 MODE ***
3 R/A & P/O
4 TIME CLOCK DATA EDIT
5 PROGRAM
6 SERVER TRANSFER
PAUL
3. Select the Program option.
5 CASH
4. Select the Starting Order # Program (Program 2).
2 CASH
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0 4-31
To Next Page
Loading...
