Panasonic 5000 Series - Clock-Out for Breaks; Return from Break

OPERATOR PROCEDURES Time & Attendance
*** TIME IN ***
#002 STEVE
MGR JOB 1
CSHR #1
NOV.15'94 0001
No1834 08:59 #01
Clock-Out for Breaks
Use this procedure if your restaurant pays for breaks. If breaks are not paid, use the
regular Clock-Out procedure to clock out at the beginning of a break.
1. Enter your employee number.
2. Press BREAK.
3. Check the displayed information. If you entered the wrong number, press CLEAR.
If everything is correct, press BREAK again.
[ employee # ] [ verify information ]
BREAK BREAK
Note: If you use employee cards, press BREAK, then run your card through the Magnetic
Card Reader. Press BREAK again.
** BREAK OUT **
#002 STEVE
MGR JOB 1
CSHR #1
NOV.15'94 0001
No1836 11:15 #01
Return from Break
1. Enter your employee number.
2. Press CLOCK IN.
3. Enter your job code number, if required.
2-58 Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0