MANAGER PROGRAMS Product Mix Program
Program 28: Product Mix Program
Use Program 28 to set up the Product Mix Group categories that track totals on your
Product Mix, Product Projection, and Product Comparison Reports. In this program, you
assign a name to the group and select the type of count it reports.
1. With the keylock in MGR Mode, use this sequence to go into the Product Mix
program.
5 CASH 2 8 CASH
2. Enter the number of the Product Mix Group you are programming. The system
displays the number of groups available. (In the following example, groups 1-20 are
available.)
[ group # ]
CSHR
14:20 LVL1 P1
*** MIX# 1 ***
DSCRPT
1 - 20 CSHR
#/UNIT 00 (DSCRPT) CASH
(#/UNIT) SBTL
JIM
Note: The number of the group you selected displays below the time line. If a product mix
group is already assigned to the number you entered, its current settings display. In
the above example, the selected number is not yet programmed.
3. If you are changing the descriptor, place the Alpha overlay on the keyboard
and press ALPHA SHIFT. Type the name of the product mix group.
5-34 Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
To Next Page