X1 Mode Programs MANAGER OPERATIONS
Remote Steering
Another program listed on the X1 Mode Program menu is Remote Steering. This program
directs your menu item steer flags to the appropriate remote printer or video. Your POS
dealer usually defines the normal settings for this program. You may, however, need to
make changes to adjust to your high and low volume hours.
In the PLU Program, your menu items are assigned Steer Flags. Use the following
procedure to direct the Steer Flags to a remote (kitchen) printer or a kitchen video
monitor.
1. Turn your keylock to MGR Mode.
2. Select the X (&PRGM) option. Your screen advances to the X1 Mode menu.
1 CASH
3. Select the Program option. The screen lists the X1 Mode programs. If "Enter
Manager" displays, you must enter your manager number before you can continue
with this procedure. (See the Manager Log-on Procedure.)
5 CASH
1 PLU SHIFT 11:15 LVL1 MGR
2 ORDER # START ** X1 PROGRAM **
3 REMOTE STEERING
4 DRAWER ASSIGN
5 SERVER DISABLE
6 GCK # START
PAUL
4. Select Remote Steering. The screen advances to the menu shown next.
3 CASH
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0 4-33
To Next Page