X1 Mode Programs MANAGER OPERATIONS
6. Use the following procedure to change the steering assignments of the kitchen
video monitors. The six digit positions listed to the left of the KVS Steer message
correspond to Steer Flags (S.F.) 6 through 1. Enter the number of the video
monitor (0-9) to which each Steer Flag is directed. If, for example, you want to
direct Steer Flag 3 to KVS #4, enter a '4' in position D.
[ __ __ __ __ __ __ ]
SBTL
A B C D E F
A - enter the KVS # for S.F. 6 D - enter the KVS # for S.F. 3
B - enter the KVS # for S.F. 5 E - enter the KVS # for S.F. 2
C - enter the KVS # for S.F. 4 F - enter the KVS # for S.F. 1
Note: Use the following entries.
1= KVS 1, CRT 1 4= KVS 2, CRT 1
2= KVS 1, CRT 2 5= KVS 2, CRT 2
3= KVS 1, CRT 3 6= KVS 2, CRT 3
Enter a zero (0) for positions A-F you are not using.
7. Press CASH to go to the X1 Mode menu. You can stay in this menu to select
another X1 Mode option.
CASH
8. When you want to return to the MGR Mode Menu, press CASH.
CASH
Drawer Assignment
In a two-drawer system, you use X1 Mode Program 4 to assign the drawer to a cashier.
When the cashier logs on, the system checks this program to determine which drawer is
activated. Use this procedure for drawer assignment.
1. Turn the keylock to MGR Mode.
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0 4-35
To Next Page
Loading...
