Employee Program MANAGER PROGRAMS
4 Job Code & Pay Rate 2
Job Code: Use the first two digits of this field to list a second job code
this employee can use when they clock-in (if necessary).
Pay Rate: Enter the pay rate number (from Program 56) associated with
the job code you entered in the first two digits of this field.
[ job code # ]
[ pay rate # ]
CASH
5 Job Code & Pay Rate 3
Job Code: Use the first two digits of this field to list a third job code that
applies to this employee (if necessary).
Pay Rate: Enter the pay rate number (from Program 56) associated with
the job code you entered in the first two digits of this field.
[ job code # ]
[ pay rate # ]
CASH
6 Job Code & Pay Rate 4
Job Code: Use the first two digits of this field to list a fourth job code
that applies to this employee (if necessary).
Pay Rate: Enter the pay rate number (from Program 56) associated with
the job code you entered in the first two digits of this field.
[ job code # ]
[ pay rate # ]
CASH
7 Status
Select options that apply to this employee. You can add the values, if
necessary.
1= Require a job code entry at each Clock-in. If not set, a job code entry is
optional, and the default job code (assigned in Job 1, above) is activated,
unless another job code is specified at clock-in.
2= Require a tip entry when this employee clocks out.
6. Repeat Steps 2 through 5 for each employee you must program or change.
7. To leave this program, press CASH twice.
CASH CASH
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0 5-67
To Next Page