OPERATOR PROCEDURES Payment
displays at the bottom of your screen.
3. Enter the amount being paid in cash.
4. Press CASH.
[ charge amt. ]
[ swipe card ] [ cash amt. ]
CASH
Note: If it is more convenient for you or the customer, you can enter the cash portion of the
payment first. For example, if the customer wants to pay $10.00 cash, and the
remainder of the balance with a credit card, enter: $10.00, CASH, then swipe the
credit card. If the credit card has expired, you must tender the transaction with a
different form of payment.
Individual Charge Keys
When you have a separate key for each credit card, the procedure you use depends on the
method of tender: Exact Tender, Overtender, Partial Tender, and Charge with Account
Number Entry. Refer to the description for your transaction.
Exact Tender: Use this procedure if the charge covers the entire amount of the
customer total.
Press the appropriate credit card key.
VISA
Overtender with
Automatic Tip: Some systems allow you to overtender a credit card. The overtender
amount automatically becomes a charge tip. If for example, the
customer total comes to $20.00, and the charge total (including the
tip) is $24.00, you can enter $24.00 before you press the credit card
key. The $4.00 is automatically treated as a charge tip.
1. Enter the final credit card amount (including your tip).
2. Press the appropriate credit card key.
[ credit card total ]
MASTER
CARD
2-46 Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
To Next Page