OPERATOR PROCEDURES Payment
Before you start, you should know that the Coded Charge (Charge Look-Up) key can list
the code numbers of your credit cards. To review the numbers you can press the Coded
Charge or CHARGE LOOK-UP key.
CHRG
LK-UP
If you press the key by itself, your screen lists available credit cards and their associated
code numbers, as shown here.
11:15 LVL1 REG
1 VISA TABLE #GST2
2 MSTRCARD #003
3 AMEX
4 DINERS
5 DISCOVER
TAX .50
TOTL 9.85
SAM
DAVE
You can press CLEAR to clear this display, or continue to one of the following credit card
procedures.
Exact Tender:
1. Enter the number of the credit card you need.
2. Press CHARGE LOOK-UP.
[ credit card # ]
CHRG
LK-UP
Split Tender: If you are using a coded charge, use this procedure for split tender.
This is where part of the transaction is paid with a credit card and
part with another credit card, a personal check, or cash.
1. Enter the code number associated with the credit card.
2. Press @.
3. Enter the amount being paid with this credit card.
4. Press CHARGE LOOK-UP.
2-48 Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
To Next Page