DBS
FF-1 System mode
SECTION 400 (Version 3.0)
Issue 1 January 1990
FFl-2#-3#-lO#-(1 - 3)#
Automatic pause position
for each dial -
Dial 2
Same as (FFl-2#-3#-(1- 3)#). lt is specified after
which digit dialed there should be
a pause having
made a connection with an outside line of the
system and then dialing 2.
FFl-t#-3#-13#-(1 - 3)#
Automatic pause
position for each dial -
Dial 5
Same as (FFl-2#-3#-(l- 3)#). It is specified after
which digit dialed there should be a pause having
made a connection with an outside line of the
system and then dialing 5.
ICONFl#: No automatic pause
after dialina 2
l#: Automatic pause at 1st digit
after
dialing 2
2#: Automatic pause at 2nd digit after dialing 2
3#: Automatic pause at 3rd digit after dialing 2
jCONFl#: No automatic cause after dialina 5
l#:
Automatic pause at
1st
digit after dialing 5
2#: Automatic pause at 2nd digit after dialing 5
3#: Automatic pause at 3rd digit after dialing 5
-
FFl-2#-3#-l l#-( 1 - 3)#
Automatic pause
position for each dial -
Dial 3
Same as (FFl-2#-3#-(1 - 3)#). It is specified after
which digit dialed there should be
a
pause having
made a connection with an outside line of the
system and then dialing 3.
FFl-2#-3#-14#-(l- 3)#
Automatic pause position
for each dial -
Dial 6
Same as (FFl-2#-3#-(1 - 3)#). It is specified after
which digit
dialed there should
be a pause having
made a connection with an outside line of the
system and then dialing 6.
ICONFlR: No automatic cause after dialina 3
18: Automatic pause on 1st digit after dialing 3
2#: Automatic pause on 2nd digit after dialing 3
3#: Automatic pause on 3rd digit
after
dialing 3
ICONFl#: No automatic Pause after dialinq 6
l#: Automatic pause at 1st digit after dialing 6
2#: Automatic pause at 2nd digit after dialing 6
3#: Automatic pause at 3rd digit after dialing 6
FFl-2#-3#-12#-(1 - 3)#
Automatic pause
position for each dial -
Dial 4
Same as (FFl-2#-3#-(1- 3)#). It is specified after
which digit dialed there should be
a pause
having
made a connection with an outside line of the
system and then dialing 4.
FFl-2#-3#-l5#-(l- 3)#
Automatic pause position
for each dial -
Dial 7
Same as (FFl-2#-3#-(l- 3)#). It is specified after
which digit
dialed there
should be a pause having
made a connection with an outside line of the
system and then dialing 7.
jCONFl#: No automatic oause after dialino 4
1~8: Automatic pause at 1st digit after dialing 4
2#: Automatic pause at 2nd digit after dialing 4
3#: Automatic pause at 3rd digit after dialing 4
[CONFI#: No automatic Dause after dialina 7
1#: Automatic pause at 1st digit after dialing 7
2#: Automatic pause at 2nd digit after dialing 7
3#: Automatic pause at 3rd digit after dialing 7
-18-
To Next Page