Panasonic 616 - Page 131

DBS
FF-1 System mode
SECTION 400 (Version 3.0)
Issue 1 January 1990
FFl-2#-4#-4#-(0 or l)#
EP! control when paging - #02
It is set whether the EPI (External Page Interface) is
to be used when calling paging group %02.
O#: No EPI relav operation when callino paqinq
arouo 02
l#: EPI relay operation when calling paging
group 02
FFl-2#-4#-f#-(O or l)#
EPI control when paging - #03
It is set whether the EPI (External Page Interface) is
to be used when calling paging group #03.
O#: No EPI relav ooeration when callina oaoinq
arouo 03
1#: EPI relay operation when calling paging
group 03
FFl-2#-4#-6#-(0 or l)#
EPI control when paging - #04
It is set whetherthe EPI (External Page Interface) is
to be used when calling paging group #04.
O+: No EPI reiav ooeration when callino oaoinq
arouo 04
l#: EPI relay operation when calling paging
group 04
FFl-2#-4#-7#-(0 or ?)#
EPI control when paging - #05
It is set whether the EPI (External Page Interface) is
to be used when calling paging group #OS.
O#: No EPI retav ooeration when callinq oaainq
grow 05
l#: EPI relay operation when calling paging
group 05
FFl-2#-4#-B#-(0 or l)#
EPI control when paging - #06
It is set whether the EPI (External Page Interface) is
to be used when calling paging group #06.
O#: No EPI relav operation when callino oaqinq
arouo 06
l#: EPI relay operation when calling paging
group 06
FFl-2#-4#-9#-(0 or l)#
EPI control when paging - #07
It is set whether the EPI (External Page Interface) is
to be used when calling paging group #07.
O#: No EPI relav ooeration when callinq oaoinq
tarouo 07
l#: EPI relay operation when calling paging
group 07
3 - I- 3 System 7imerSetting Mode
Here the settings relating to time are made for
operating the system.
The appropriate settings should be specified
according to the users preferences and actual
method of use, while also taking into account the
specifications for the outside lines connected.
-2o-