DBS
FF-3 Extension mode
SECTION 400 (Version 3.0)
Issue 1 January 1990
FF3-(1- 72)#-27#- (0 - 13)#
Large LCD information on the intercom
dial tone status (IDT)
The contents are set for display on a large LCD
when the extension is involved in an intercom dial
tone (off hook) status.
08: No chanoe
l#: Change to menu information
2%: Change to personal speed dial index
38: Change to system speed dial index
4%: Change to extension index
5#: Change to guidance menu 1
(ABSES, AC-CODE,LKOUT,REMDR,FF-Key)
6#: Change to guidance menu 2
(PSD,CFWD/AII call/No ans/On busy/Out side)
78: Change to guidance menu 3
(PGM,PKHLD,DND,SVDI,BGM)
8%: Change to guidance menu 4 (Attendant only)
(Timer set,Timer adjust
Attendant cancel,Day/ Night)
9#: Change to guidance menu 5 (Attendant only)
(SSD name number,EXT name number
Maintenance code,Key code,DISA code)
108: Change to guidance menu 6 (Attendant only)
(Program mode,Outgoing amount
incoming amount,Use SSD amount)
1 l#: Change to function 1
(BGM,DND, REMDRmSES,CFWD,MUTE,
LKOUT,MAIL,BROD,ABS-CSL)
lt#: Change to function 2
(DT,HS, MSGE-CSL,MSGE-CSL, CONF)
13#: Change to function 3
(PGANS,Page-Z/1/2/3/4/5/6/7, All Zone)
14W: Change to function 4
(CONF,TONE,Set MSC,TRFR.RLSE)
15%: Change to function 5
(SADI/REDUDTMFCV/RLSE,AC-CODE,MUTE)
16#: Change to function 6
(C-WATNG,MSGE,CO-QNG,OVRDE,RLSE)
17%: Change to function 7
(AC-CODE,LCR,TRK-C/81/82/83/84/85/86)
18#: Change to function 8
(UNA-PUPIGroup/DirecWF+age)
19#: Change to function 9
(MCO, LCR, PSD,SSD, EXT,MUTE,PAGE,TONE)
2O#c: Change to function 10
(MSGE,TRFR,RLSE,CONF,MUTE,DND,TONE,
PKHLD)
21+: Change to function 11
(REDI,DTMFCV.
AC-CODE,SSD,PSD,RUE,MUTE,EXT)
228: Change to function 12
(SADI.PSD,SSD,CONF,
AC-CODE,MUTE,RLSE.TRFR.REMDR)
23#: Change to function 13
(PGANS,HS,TONE,MUTE,UNA,EXT,PSD,SSD)
24#: Change to function 14
(TAKBK,RLSE,CONF,TRFR,DND,PKHLD)
-38-