Panasonic 616 - Page 150

SECTION 400 (Version 3.0)
Issue 1 January 1990
DBS
FF-3 Extension mode
FF3-( 1 - 72)#-28#-(0 - 13)#
Large LCD information on the intercom
call status (lNT Talk)
The contents are set for display on a large LCD
when the extension is involved in an intercom call
(Caliing,Receiving call,On the
conversation,Making the call waiting) status.
08: No chanae
l#: Ulange to menu information
2#: Change to personal speed dial index
3#: Change to system speed dial index
4#: Change to extension index
5#: Change to guidance menu 1
(ABSES, AC-CODE,LKOUT,REMDR,FF-Key)
6#: Change to guidance menu 2
(PSD,CFWD/AII call/No ans/On busy/Out side)
7#: Change to guidance menu 3
(PCM,PKHLD,DND,SVDI,BCM)
8#: Change to guidance menu 4 (Attendant only)
(Timer set,Timer adjust,
Attendant cancel,Day/ Night)
9#: Change to guidance menu 5 (Attendant only)
(SSD name number,EXT name number
Maintenance code,Key code,DISA code)
10#: Change to guidance menu 6 (Attendant only)
(Program mode,Outgoing amount
incoming amount,Use SSD amount)
1 l+: Change to function 1
(BGM,DND, REMDR,ABSE5,CFWD,MUTE,
LKOUT,MAIL,BROD,ABS-C5L)
12#: Change to function 2
(DT,HS, MSGE-CSL,MSGE-CSL, CONF)
13#: Change to function 3
(PGANS,Page-Z/l/2/3/4/5/6/7, All Zone)
14#: Change to function 4
(CONF,TONE,Set MSG,TRFR,RLSE,MUTE)
158: Change to function 5
(SADl/REDl/DTMFCV/RLSE,AC-CODE,MUTE)
16#: Change to function 6
(C-WATNG,MSGE,CO-QNG,OVRDE,RLSE)
17#: Change to function 7
(AC-CODE,LCR,TRK-G/81/82/83/84/85/86)
18#: Change to function 8
(UNA-PUPIGroup/Direct/Page)
19#: Change to function 9
(MCO, LCR, PSD, SSD, EXT,MUTE,PAGE,TONE)
20#: Change to function 10
(MSGE,TRFR,RLSE,CONF,MUTE,DND,TONE,
PKHLD)
21#: Change to function 11
(REDLDTMFCV,
AC-CODE,SSD,PSD,RLSE,MUTE,EXT)
22#: Change to function 12
(SADI,PSD,SSD,CONF,
AC-CODE,MUTE,RKE,TRFR,REMDR)
23#: Change to function 13
(PGANS,HS,TONE,MUTE,UNA,EXT,PSD,SSD)
24#: Change to function 14
(TAKBK.RLSE,CONF,TRFR,DND,PKHLD)
-39-