DBS
n-3 Extension mode
FF3-( 1 - 72)#- 29#-(0 - 13)#
Large
LCD
information on the outside line
corkersation (In dialing) status
The contents are set for display on a large LCD
when the extension is getthe outside line.
08: No chanae
l#: Change to menu information
2#: Change to personal speed dial index
3~.: Change to system speed dial index
4#:
Change to extension index
58:
Change to guidance menu 1
(ABSES, AC-CODE.LKOUT,REMDR,FF-Key)
6#: Change to guidance menu 2
(PSD,CFWD/AII call/No ans/On busy/Outside)
7#: Change to guidance menu 3
(PGM,PKHLD,DND,SVDI,BGM)
8#: Change to guidance menu 4 (Attendant only)
(Timer setTimer adjust,
Attendant cancel,Day/ Night)
9#:
Change to guidance menu S (Attendant only)
(SSD name number,EXT name number
Maintenance code,Key code,DISA code)
10%: Change to guidance menu 6 (Attendant only)
(Program mode.Outgoing amount
Incoming amount,Use SSD amount)
SECTION 400 (Version 3.0)
Issue 1 January 1990
1 l#: Change to function 1
(BGM,DND, REMDR,ABSES,CFWD,MUTE.
LKOUT,MAlL,BROD,A8S-CSL)
12%: Change to function 2
(DT,HS, MSGE-CSL,MSGE-CSL, CONF)
13B: Change to function 3
(PGANS,Pag&/1/2/3/4/5/6/7, All Zone)
14#: Change to function 4
(CONF,TONE,Set MSG,TRFR,RLSE,MUTE)
15#: Change to function 5
(SADVREDI/DTMFCVlRLSE,AC-CODE,MUTE)
16#: Change to function 6
(C-WATNG,MSGE,CO-QNG,OVRDE,RLSE)
17#: Change to function 7
(AC-CODE.LCR,TRK-G/81/82/83/84/85/86)
18#: Change to function 8
(UNA-PUPJGroup/Direct/Page)
19#:Changetofunction9
(MCO,LCR,PSD,SSD, EXT,MUTE.PAGE,TONE)
200: Change to function 10
(MSGE,TRFR,RUE,CONF,MUTE,DND,TONE,
PKHLD)
218: Change to function 11
(REDLDTMFCV,
AC-CODE,SSD,PSD,RUE,MUTE,EXT)
22#:
Change to
function 12
(SADI,PSD,SSD,CONF,
AC-CODE,MUTE,RLSE,TRFR,REMDR)
23f: Change to function 13
(PGANS,HS,TONE,MUTE,UNA.EXT,PSD,SSD)
24#: Change to function 14
(TAKEK,RLSE,CONF,TRFR,DND,PKHLD)
-4O-