SECTION 400 (Version 3.0)
Issue 1 January 1990
FF3-( 1 - 72)#- 30#-(0 - 13)#
Large
LCD
information on the outside line
conversation
(After
dialing) status
The contents are set for display on a large LCD
when the extension started the outside line
conversation.
0#: No chanae
I#: Change to menu information
2%: Change to personal speed dial index
3#: Change to system speed dial index
4#: Change to extension index
5#: Change to guidance menu 1
(ABSES, AC-CODE,LKOUT,REMDR,FF-Key)
6#: Change to guidance menu 2
(PSD,CNVD/AII call/No ans/On busy/Out side)
7#: Change to guidance menu 3
(PGM,PKHLD,DND,SVDI,BCM)
8#: Change to guidance menu 4 (Attendant only)
(Timer set,Timer adjust,
Attendant cancel,Day/ Night)
9#: Change to guidance menu 5 (Attendant only)
(SSD name number,EXT name number
Maintenance code,Key code,DISA code)
1 O#: Change to guidance menu 6 (Attendant only)
(Program mode,Outgoing amount
incoming amount,Use SSD amount)
DBS
FF-3 Extension mode
. .
1 l#: Change to function 1
(BGM,DND, REMDR,ABSES,CFWD.MUTE,
LKOUT,MAIL,BROD,ABS-CSL)
12%: Change to function 2
(DT,HS, MSGE-CSL,MSGE-CSL, CONF)
13#: Change to function 3
(PGANS,Page-Zfll2/3I4/56/7, All Zone)
148: Change to function 4
(CONF,TONE,Set MSG,TRFR,RLSE,MUTE)
15#: Change to function 5
(SADl/REDl/DTMFCV/RlSE,AC-CODE,MUTE)
16#: Change to function 6
(C-WATNG,MSGE,CO-QNG,OVRDE.RLSE)
171: Change to funczion 7
(AC-C00E,LCR,TRK-GiB1/82/83/84/85I86)
18#: Change to function 8
(UNA-PUPJGroup/Direct/Page)
19#: Change to function 9
(MCO, LCR, PSD,SSD, EXT,MUTE.PAGE,TONE)
20t: Change to function 10
(MSGE,TRFR,RLSE,CONF,MUTE,DND,TONE,
PKHLD)
2lf: Change to function 11
(REDI,DTMFCV,
AC-CODE,SSD,PSD,RLSE,MUTE,EXT)
228: Change to function 12
(SADI,PSD,SSD,CONF,
AC-CODE,MUTE,RUE.TRFR,REMDR)
23#: Change to function 13
(PGANS,HS,TONE,MUTE,UNA,EXT,PSD,SSD)
24#: Change to function 14
(TAKBK,RLSE,CONF,TRFR,DND,PKHLD)
-4f-
To Next Page