Panasonic 616 - Page 154

SECTION 400 (Version 3.0)
Issue 1 January 1990
DBS
FF-3 Extension mode
FF3-( I- 72)#- 32#-(0 - l3)#
Large LCD information on the receiving
call wait status
The contents are set for display on a large LCD
when the extension is receiving the call waiting.
O#: No chanae
l#: Change to menu information
28: Change to personal speed dial index
3%: Change to system speed dial index
OR: Change to extension index
5#: Change to guidance menu 1
(ABSES, AC-CODE,LKOUT,REMDR,FF-Key)
6#: Change to guidance menu 2
(PSD,CFWD/AII calUNo ans/On busy/Out side)
7#: Change to guidance menu 3
(PGM,PKHLD,DND,SVDI,BGM)
8#: Change to guidance menu 4 (Attendant only)
(Timer set.,Timer adjust,
Attendant cancel,Day/ Night)
9#: Change to guidance menu 5 (Attendant only)
(SSD name number,EXT name number
Maintenance code,Key code,DlSA code)
10#: Change to guidance menu 6 (Attendant only)
(Program mode,Outgoing amount
Incoming amount,Use SSD amount)
11%: Change to function 1
.(BGM,DND, REMDR,ABSES,CFWD,MUTE,
LKOUT,MAk,BROD,ABS-CSL)
12#: Change to function 2
(DT,HS, MSGE-CSL,MSGE-CSL, CONF)
131: Change to function 3
(PGANS,Page-U1N6J7, All Zone)
146: Change to function 4
(CONF,TONE,Set MSC,TRFR,RLSE,MUTE)
156: Change to function 5
(SADl/REDVDTMFCV/RLSE,AC-CODE,MUTE)
168: Change to function 6
(C-WATNG,MSGE,CO-QNG,OVRDE,RLSE)
171: Change to function 7
(AC-CODE,LCR,TRK-G/Bl/82/83/84/85/86)
18%: Change to function 8
(UNA-PUPIGrouplDirecWage)
19#: Change to function 9
(MCO, LCR, PSD, SSD, DCT,MUTE,PAGE,TONE)
20#: Change to function 10
(MSGE,TRFR,RLsE,CONF,MUTE,DND,lONE,
PKHLD)
2liF: Change to function 11
(REDLDTMFCV,
AC-CODE,SSD,PSD,RLSE,MUTE,U(T)
22f: Change to function 12
(SADI,PSD,SSD,CONF,
AC-CODE,MUTE,RLSE,TRFR,REMDR)
23#: Change to function 13
(PGANS,HS,TONE,MUTE,UNA,EXT,PSD,SSD)
24#: Change to function 14
(TAKBK,RLSE,CONF,TRFR,DND,PKHLD)
-43-