Panasonic 616 - Page 155

DBS
FF-3 Extension mode
SECTION 400 (Version 3.0)
Issue 1 January 1990
FF3-(1 - 72)#- 33#-(0 - 13)#
Large LCD information on the busy tone
receiving status
The contents are set for display on a large LCD
when the extension is receiving the intercom busy
tone.
O#: No chanoe
l#: Change to menu information
2%: Change to personal speed dial index
3#: Change to system speed’dial index
4#: Change to extension index
58: Change to guidance menu 1
(ABSES, AC-CODE,LKOUT,REMDR,FF-Key)
6%: Change to guidance menu 2
(PSD,CRNDIAII call/No a&On busy/Out side)
7#: Change to guidance menu 3
(PGM,PKHLD,DND,SVDI,BGM)
8#: Change to guidance menu 4 (Attendant only)
(Timer se&Timer adju&
Attendant cancel,Day / Night)
9#: Change to guidance menu 5 (Attendant only)
(SSD name number,EXT name number
Maintenance code,Key code,DISA code)
lO#: Change to guidance menu 6 (Attendant only)
(Program mode,Outgoing amount
incoming amountUse SSD amount)
1 l#: Change to function 1
(BGM,DND, REMDR,ABSES,CFWD,MUTE,
LKOUT,MAIL,BROD,ABS-CSL)
12#: Change to function 2
(DT,HS, MSGE-CSL,MSGE-CSL, CONF)
13#: Change to function 3
(PGANS,Page-U1N, AR Zone)
14#: Change to function 4
(CONF,TONE,Set MSG,TRFR,RLSE,MUTE)
lS#: Change to function 5
(SADVREDUDTMFCV/RLSE,AC-CODEMUTE)
16#: Change to function 6
(C-WATNG,MSGE,CQ-QNG,OVRDE,RLSE)
178: Change to function 7
(AC-CODE,LCR,TRK-G/81/82/83184/85/86)
1.8#: Change to function 8
(UNA-PUPJGroup/Direct/Page)
19#: Change to function 9
(MCO, LCR, PSD, SSD, EXT,MUTE,PAGE,TONE)
208: Change to function 10
(MSGE,TRFR,RLSE,CONF,MUTE,DND,TONE,
PKHLD)
21#: Change to function 11
(REDLDTMFCV,
AC-CODE,SSD,PSD,RLSE,MUTE,EXT)
22#: Change to function 12
(SADI,PSD,SSD,CONF,
AC-CODE,MUTE,RLSE,TRFR,REMDR)
23#: Change to function 13
(PGANS,HS,TONE,MUTE,UNA,EXT,PSD,SSD)
24#: Change to function 14
(TAKBK,RLSE,CONF,TRFR,DND,PKHLD)
-44-