SECTION 400 (Version 3.0)
Issue 1 January 1990
Specifications are made with regard to incoming
outside calls and incoming intercom call groups for
each extension.
In the case of outside lines it is set which incoming
calls each extension is to receive.
The settings for daytime and nighttime can be
done separately.
There are the following two group settings for
.
incoming intercom calls.
A:Call hunting group setting
Extensions are set in groups for answering
incoming calls.
The specifications for group processing after
incoming calls are also set
A maximum of 8 groups each with 8 extensions
can be programmed.
8: Call coverage group setting
Extension groups are set for the substiture
answering of incoming calls
Each group comprises 8 extensions, 2 of which
can be programmed as secretary telephones for
substitute answering.
There can be a maximum of 16 groups.
DBS
FF-4 Ring mode
-45-
To Next Page