D%S
FF-4 Ring mode
3- 4- 1 Day Time Incoming Calf Setting
mode
FF4-l#-(l -73)#-(l- 32)#-(0 or l)#
Daytime incoming outside line call setting
table
It is set which incoming outside line call tones are
to sound for each extension during the day. While
it is possible to make calls from
an
extension
pon
not programmed for incoming calls, it is not
possible to use the auto answering function for
incoming calls. Incoming calls are answered by
pressing the relevant line key or utilizing the
function for accessing the set outside line.
Extensions not stored in this table are not used for
incoming outside line calls.
Setting step 1.
Select Extension port number:
Setting step 2.
Trunk port number:
Setting step 3.
Setting Data to ring 1 or no ring 0:
(l-73)#
(l-32)#
(1 I O)#
SECTION 400 (Version 3.0)
Issue 1 January 1990
The structure of the data storing in the table is as
follows.
Extension pan number 1 #to 72#
1
Trunk port number l# to 32#
1
Ringing for set incoming outside line calls in
daytime (Yes: 1 or No: O)#
And
Number (for UNA Relay Terminal input) 73f
1
Trunk port number 1% to 32#
1
Ringing for set incoming outside line calls in
daytime (Yes: 1 or No: O)#
Note 1. When program Extension port number
73in the setting step 2 that make to set the
data for ail otherports extension by
automatically.
Note2. Initial/y Exxtension port number 1 and 2 is
set to ring forattendant telephone.
-46-
To Next Page