Panasonic 616 - Page 160

SECTION 400 (Version 3.0)
Issue 1 January 1990
FF4-3#-(1- 8)#-2#-(l - 8)#
Next caI1 hunting group
If all the extensions in one hunting group cannot
receive an incoming call, it can be automatically
transferred to another hunting group. However, a
hunting group in which automatic transfer is
.
actually operating at the time cannot be set for
this. It has to be set after that operation has
finished.
A hunting group number for the transferee is set
for each transferring hunting group. This setting
can be canceled by inputting the [CONF] key.
l#-2#-(1- 8)# Transfer from group 1 to set group
Group (1 to 8)#
:CONF (clear1
2#-2#-(1 - 8)W
Transfer from group 2 to set group
Group (1 to 8)# :CONF (clear1
3#-2#-(1 - 8)# Transfer from group 3 to Set grbUP
Group (1 to 8)# :CONF (clear1
4#-2#-(1 - 8)# Transfer from group 4to set group
Group (1 to 8)#
:CONF (clear)
5#-2#-(l- 8)# Transfer from group 5 to set group
Group (1 to 8)#
:CONF (clear)
6#-ZP-(1 -8)# Transfer from group 6 to set group
Group (1 to 8)# :CONF (clear)
7#-2#-(1- 8)# Transfer from group 7 to set group
Group (1 to 8)#
:CONF (clear)
8#-2#-(1 - 8)# Transfer from group 8 to set group
Group (1 to 8)# :CONF (clear)
D8S
FF-4 Ring mode
-49-