DBS
FF-8 LCR mode
FF&8#-(l- 8)#-(Max. 16 digit numbers)#
Dial
add table storing
The numbers it is desired to add to the heads
of the dial numbers input into each LCR
trunk group are stored.
Up to a maximum of 16 digits can be added
for dialing. When dialing using a stored LCR
trunk group, the stored numbers are sent out
first Numbers already stored are canceled by
inputting CONF.
In addition, *** and ’ W” are stored by using
the FFl 1 and FFl2 keys.
And pause data are stored by using the
[REDIAL] Key.
LCR trunk group number: 1#
(Dial add number/Max 16 diaits)#
I (Special area code table number l-15)
LCR
trunk group number: 8#
(Dial add number/Max 16 dioits)#
SECTION 400 (Version 3.0)
Issue 1 January l!B0
-72-
To Next Page
Loading...
