Section 400
. .
S-DBS Programming Instructions
v1.0 Issue 1 July 1990
:r -.
:, i
0014#-( l-8)#
AUTOMATIC PAUSE - DIAL 9
CONF: No automatic Dause after dialing digit 9
e 1st digit after dialing 9
2ntii~giCifter~~didiTig~
4#: Automatic
3rd digit after dialing 9
pause before the 4th digit after dialing 9
5#: Automatic pause before the .5th digit after dialing 9
6#: Automatic pause before the 6th digit after dialing 9
7#: Automatic pause before the 7th digit after dialing 9
8#: Automatic pause before the 8th digit after dialing 9
.
0015#-(l-8)#
AUTOMATIC PAUSE - DLAL 0
CONF: No automatic Dause after dialine dipit 0
l#: Automatic pause before the 1st digit after dialing 0
2#: Automatic pause before the
2nd
digit after dialing 0
3#: Automatic pause before the 3rd digit after dialing 0
4#: Automatic pause before the 4th digit after dialing 0
5#: Automatic pause before the 5th digit after dialing 0
6#: Automatic pause before the 6th digit after dialing 0
7#:
Automatic pause before the
7th
digit after dialing 0
8#: Automatic pause before the 8th digit after dialing 0
0016#-(OJ-7)#
AUTOMATIC PAUSE TIMER
The pause timer can be set within a range of 2 to 9 seconds.
0
O#: 2-second pause
l#: 3-second Dause
2#: 4-second pause
3#: 5-second pause
4#:
6-second pause
5#: 7-second pause
6#: 8-second pause
7#: g-second pause
.
/ ‘.,
NOTE:
Set the pause timer at the automatic pause position.
See
PSI) 1
key addresses 0006-001.
L
:
.:.
1
When REDIAL is stored in
SSD
and PSD a pause is automatically
inserted during dialing.
I
26
To Next Page