S-DBS Programming Instructions
Section 400
v1.0
Issue 1 July 1990 ‘;.. -..
0038#-(0, I-4)#
CPC SIGNAL TIMER - SLT EXTENSION LINE
The CPC signal is a disconnect signal sent to the SLT.
O#: No signal
l#: 0.25 second
2#: 0.50 second
3#: 0.75 second
4#: 1 second
0039#-(0 or l)#
DOOR BOX SPEECH PATH
-- --
The 308 system has 2 analog speech paths and the 616 system has 4 analog
speech paths.
door box only.
One of these speech paths for each system can be set aside for the
O#: No door box sneech oath
l#: Door box speech path
c
!
0040#-(0
or 1)#
SENSOR DETECTING SIGNAL
O#: Detects a make sisal
l#: Detects a break signal
0041#-(0 or l)#
SENSOR SIGNAL ALARM RING STOP
O#: Sensor detectine sifznal stons the alarm ring
l#: Picking up the receiver stops the alarm ring
.
,.^
c- .;
.I
34
To Next Page