S-DBS Programming Instructions
v1.0
Section
400
Issue 1 July 1990
(01-06) ll#-(0 or 1)#
--.POOLED-TRUNK ACCESS DIAL 9
When 9 is dialed there is an automatic connection to a vacant line in the group.
O#: Not assigned to pooled trunk access dial 9
l#: Pooled trunk access dial 9
NOTE:
See InstaIlation Instructions, Section 300
for
information on how to cut the jumper cable on
the Key System Unit.
*
(01-06) 12#-(CONF, l-3)#
POOLED TRUNK ACCESS GROUP
When 81-83 is dialed there is an automatic connection to a vacant Iine in the
u
moup. ki maxunum 01 three gK3pSii-biiXSk~h th
e
----.-- --.
combination.
system m any
CONF: Not subiect to pooled trunk access group
l#:
Pooled trunk access group 81
.
g:
Pooled trunk access group 82
l.i#:
Pooled trunk access group 83
1,2,3#:
Pooled trunk access groups 81 and 82
1. 3#:
Pooled trunk access groups 81.82 and 83
2, 3#:
Pooled trunk access groups 81 and 83
Pooled trunk access groups 82 and 83
.
I’ !
\
\ .’
To Next Page