Section 400
Issue 1 JuIy 1990
S-DBS
Programming Instructions
v1.0
INCOMING RING TONE PAT-TERN
The ring tone pattern can be changed for each trunk port.
o#: Synchronized incominq rinP tone
l#: 3 seconds ON/ 1 second OFF
2#: 2
seconds ON/2 seconds OFF
3#:
1 second ON/-l second OFF
4#:
1 second ON/3 seconds OFF
5#: 0.5
second ON/O.5 second OFF
6#: 0.5
second ON/O.5 second OFF,
0.5
second ON/2.5 seconds OFF
7#: 0.5
second ON/3.5 seconds OFF
8#:
1 second ON/7 seconds OFF
(01-06) 14#-(0.1~7)#
INCOMING RING SIGNAL DETECTION TIME
Detects an incoming ring signal when the signal is longer than the time
-programmed* or an-incoming ring signal. -.-.--- --
O#: More than 50 ms
l#: More than 100 ms
2#:
More than 150 ms
3#:
More than 200 ms
4#:
More than 250 ms
5#:
More than 300 ms
6#:
More than 350 ms
7#:
More than 400 ms
To Next Page