Panasonic AG-CPD15P - Page 118

118
Error messages
(continued)
No. Message Measure
E15753 Altered P2 Card found
on slot1. Backup data
and reformat.
P2 card data has been modified on
another device.
Upload or export data to back it up and
reformat the card.
E15754 Altered P2 Card found
on slot2. Backup data
and reformat.
E15755
VUP Card found on slot1.
Record cannot be started.
The P2 card contains an update file.
Insert a P2 card other than the one
containing the update file.
E15756
VUP Card found on slot2.
Record cannot be started.
E15757
Illegal Card found on slot1.
Record cannot be started.
The inserted card cannot be used.
Check card type.
E15758
Illegal Card found on slot2.
Record cannot be started.
E15759
Unformatted Card found on slot1.
Record cannot be started.
An unformatted P2 card has been
inserted.
Replace it with a formatted P2 card.
E15760
Unformatted Card found on slot2.
Record cannot be started.
E15761
Write Protect Card found on slot1.
Record cannot be started.
The write-protection switch on the P2
card is set to the “PROTECT” position.
Slide the write-protection switch away
from the “PROTECT” position.
E15762
Write Protect Card found on slot2.
Record cannot be started.
E15763
No Card.
Record cannot be started.
No P2 card is inserted. Insert a P2 card.
E15764
Write Error.
Record cannot be started.
The P2 card cannot be written to.
Replace the P2 card.
E15765
Card Full.
Record cannot be started.
8 GB or lower capacity P2 cards:
The following conditions may have occurred.
•
There is no space left on the P2 card.
•
The P2 cards inserted in P2 card slots
1 and 2 contain 20,000 or more files.
Replace the P2 card with a P2 card
with free capacity, or free up space in
the P2 card for new data.
16 GB or higher capacity P2 cards:
The following conditions may have occurred.
•
There is no space left on the P2 card.
•
The P2 cards inserted in P2 card slots
1 and 2 contain 20,000 or more files.
• The maximum number of files that
can be recorded has been exceeded
for that day.
• The number of recording days has
been exceeded
Replace the P2 card with a P2 card
with free capacity, or back up the data
on the P2 card and reformat it.