34
Setting Item
Factory Default Value
Description
1
Camera Color camera setting
AE[-2 -- +2] 0 Color camera video brightness setting
Setting : -2, -1, 0, +1, +2
LPR Mode PATROL LPR mode setting
Setting : LPR (License Plate Recognition
mode), PATROL (normal mode)
LPR Shutter
Speed
1/1000 Shutter speed setting with [LPR Mode] set
to “LPR”
Setting : AUTO, 1/500, 1/1000
LPR Zoom 1.0 Zoom ratio setting with [LPR Mode] set to
“LPR”
Setting : 1.0 - 22.0
Patrol Shutter
Speed
AUTO Shutter speed setting with [LPR Mode] set
to “PATROL”
Setting : AUTO, 1/100, 1/500, 1/1000
Patrol Zoom 1.0 Zoom ratio setting with [LPR Mode] set to
“PATROL”
Setting : 1.0 - 22.0
2
Audio Audio setting
Audio2 Select INCAR Audio2 input selection
Setting : INCAR, WMIC,
LINK CAM
Audio1 ON Audio1 playback sound setting
Setting : ON, OFF
Audio2 ON Audio2 playback sound setting
Setting : ON, OFF
3
Setup/Info Setup/Information
Officer Officer settings
Officer 1 ID ---- Officer 1 ID
Officer 1 first name
---- Officer 1 first name
Officer 1 last name
---- Officer 1 last name
Officer 2 ID ---- Officer 2 ID
Officer 2 first name
---- Officer 2 first name
Officer 2 last name
---- Officer 2 last name
Operation Key
Lock
OFF Lock of buttons by an officer
Setting : ON, OFF
On Screen
Type
OFF Overlay OSD setting
Setting : AUTO, SIMPLE, DETAILS, OFF
Camera LED ON Color camera [REC] lamp setting
Setting : ON, OFF
Factory default values are shown below. Use the Remote Control Panel to change
settings. When running a PC application, the set value may be altered, or the
items that can be set may be restricted.
Setup
Items officers can set:
To Next Page
Loading...
