63
Operation Using the Remote
Control Panel (separately sold)
Recording
Starting and stopping recording
Starting recording
Press the [REC] button.
This starts video and sound recording.
The live screen appears automatically
if not already on. The Remote Control
Panel, the Color Camera and this unit
[REC] lamps go on during recording.
Note:
The Color Camera [REC] lamp
goes on regardless of camera input
setting (for example, the [CAMERA2]
connector input being selected with
the [CAMERA SELECT] button).
There are also other methods for
starting recording. For details, refer
to “Recording” on page 21.
Stopping recording
Press the [STOP] button ( ).
Pressing the [STOP] button turns off
the [REC] lamp and video and sound
recordings stop when the post record
∗
interval has elapsed. Then the [BUSY]
lamp goes off.
There are also other conditions for
stopping recording. For details,
refer to “Stopping Recording” on
pages 22, 23.
∗ Post record is a function that continues recording for a preset interval after
recording is turned off. Changing the setting requires administrator setup.
To Next Page
Loading...
