54
You can lock specific buttons on the
Remote Control Panel to prevent
accidental pressing of the buttons.
Locking
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Setup/Info] and press [ ] to
confirm the entry.
3. Use the [ , ] buttons to select
[Officer] and press [ ] to
confirm the entry.
The Officer setup top screen appears.
4. Use the [ , ] buttons to select
[Operation Key Lock].
5. Use the [
,
] buttons to select
“ON”.
The [LOCK] lamp lights, and the
buttons other than the [REC],
[MENU], [CONTROL PANEL ON/
OFF] and [RETURN] buttons, the
[REC] button on this unit, and the
[REC] button on the Color Camera
are locked.
Notes:
•
The button lock function is engaged
after returning to the Live screen.
• The key lock function in the
administrator setup (see
“Operation Key Lock” on page 83)
is independent of officer setup, so
that when locked by administrator
setup, the keys cannot be
unlocked from officer setup.
• The Color Camera zoom and
brightness buttons cannot be
locked.
• Trigger signal (GPIO1-8) control
(see page 37) is not locked.
Unlocking
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Setup/Info] and press [ ] to
confirm the entry.
3. Use the [ , ] buttons to select
[Officer] and press [ ] to
confirm the entry.
The Officer setup top screen appears.
4. Use the [ , ] buttons to select
[Operation Key Lock].
5. Use the [
,
] buttons to select
“OFF”.
The [LOCK] lamp goes off and the
buttons are unlocked.
Locking and Unlocking Buttons
To Next Page
Loading...
