Panasonic AG-CPD15P - Viewing the Status of this Unit

69
Operation Using the Remote Control Panel (separately sold)
Playback
(continued)
Viewing the status of this unit
Use the following function to see the
status of this unit or trigger signal
(GPIO1-8) status when a played back
file was recorded.
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Setup/Info] and press [ ] to
confirm the entry.
3. Use the [ , ] buttons to select
[On Screen Type].
4. Use the [ , ] buttons to select
“AUTO”, “SIMPLE”, “DETAILS”
or “OFF”.
AUTO : The simple On-Screen Display
appears for 3 to 5 seconds
when any of the following
items have been changed.
• Playback filename
• Mode indication
•
Playback speed and
status indication
SIMPLE:
The Simple On-Screen Display
appears.
DETAILS:
The Detailed On-Screen Display
appears.
OFF:
On-Screen Display closes.
Notes:
• An administrator can set the
Overlay OSD (Init On Screen Type)
selected at power-on.
• See the next page for how to read
the On-Screen Display.
• When “AUTO” is selected and the
[BOOK MARK] button is pressed
or the bookmark position is
reached, the simple On-Screen
Display does not appear but the
bookmark icon
appears for 1 to
2 seconds.
•
When “AUTO” is selected and the
trigger position is reached, the simple
On-Screen Display does not appear
but the trigger icon
appears for 1
to 2 seconds.