x1/10
2006-08-25 14:45:05
Restore
--
.
----- -----
---
.
----- ----
TRIGGER A B
OWN /TGT MPH
---
000
2006-08-25 14:51:19
x1/10
2006-08-25 14:45:05
Restore
70
<Detailed On-Screen Display>
<Simple On-Screen Display>
Speed (MPH / KPH)
OWN: own vehicle speed
TGT: target vehicle speed
Location information (latitude)
Location information (longitude)
Playback filename
(Local time at start of recording)
“NO FILE” appears when there is
no file to play back.
Mode indication
: Playback
: Pause
: Fast forward
: Rewind
: Slow
Playback speed and status indication
<Speed>
x1/10, x1/2, x4, x20, x200
<Status Display> (see “Status
Display” on page 122)
READ ERROR, META ERROR,
PLAY ERROR
Playback
(continued)
Playback location (in file units)
Date/Time
Trigger signal (GPIO1-8) input status
(GPIO 1 to 8 are displayed in order
from the left.)
The characters assigned by
[Printable] appear when the state
set by [Detection] occurs.
Appears only when there is a file
that should be restored
Mark position
: File beginning
: Trigger position
: Bookmark position
Sound output setting
(
: appears only during playback)
A1 : Audio1 is output
A2 : Audio2 is output
To Next Page
Loading...
