Panasonic AG-CPD15P - Basic Menu Operations

Menu
Camera
Audio
Restore
Setup/Info
RecCheck
Archive
Menu
Camera
Audio
Restore
Setup/Info
RecCheck
Archive
Audio
Audio1 Test (Press ENTER Key)
Audio2 Test (Press ENTER Key)
Audio2 Select
INCAR
AE[-2 -- +2]
0
(Screen example)
(Screen example)
Trigger
GPIO
Action
Detection Printable
Trigger1
NONE H
OFF
ON
Trigger2
NONE H
OFF
Trigger3
NONE H
OFF
Trigger4
NONE H
OFF
Trigger5
NONE H
OFF
Trigger6
NONE H
OFF
Trigger7
NONE H
OFF
Trigger8
NONE
H OFF
Audio
Audio1 Test (Press ENTER Key)
Audio2 Test (Press ENTER Key)
Audio2 Select
INCAR
50
1. Press the [MENU] button.
The Menu appears.
A triangle displayed at the right
edge of a menu item indicates that
it contains a submenu.
2. Use the cursor buttons [ , ]
to select an item.
3. Press the center position of
the cursor button [ ] or [ ]
to confirm the entry.
The selected item opens to reveal
selection details.
Use the [ , , , ] buttons to
set a value.
• A selected item with tiny triangles
at the top and bottom allow you to
change its value by pressing [
]
or [
].
Basic Menu Operations
For a list of all the menus, refer to “Menu List” on pages 93 - 102.
(This list also describes menus available only to administrators.)
• A selected item with tiny triangles
to the left and right allow you to
change its value by pressing [
]
or [
].
4. Use the [ , ] buttons to select
[Audio1 Test].
5.
Press the [ ] button to confirm
the entry.
The Audio1 test is now ready to run.
Example: Audio1 Test