Panasonic AG-CPD15P - Adjusting Image Focus; Adjusting Image Brightness

56
Adjusting image focus
This menu is available only when the
[CAMERA1] connector input is selected
by the [CAMERA SELECT] button.
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Camera] and press [ ] to
confirm the entry.
The
Auto Focus (ENTER)
appears.
3. Use the [ ] button to confirm
the entry.
The autofocus function automatically
focuses the image.
4. When the autofocus function
cannot properly focus the
image, use the [ , ] buttons
to select [Manual Focus].
The
Manual Focus
NF
appears.
5. To focus on a more distant
subject, keep pressing the [ ]
button and release it when it
comes into focus.
6. To focus on a closer subject,
keep pressing the [ ] button
and release it when it comes
into focus.
Adjusting image brightness
This menu is available only when the
[CAMERA1] connector input is selected
by the [CAMERA SELECT] button.
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Camera] and press [ ] to
confirm the entry.
3. Use the [
, ] buttons to select
[AE [-2 -- +2]].
The
AE[-2 -- +2]
0
appears.
4. Press the [ ] button to make
the image brighter.
Press the [ ] button to make
the image darker.
Set this button to “0” (zero) for
normal operation.
Note:
When the [CAMERA2] connector
input is selected by the [CAMERA
SELECT] button, [Camera] cannot
be selected and brightness cannot
be adjusted.
Viewing Live Video
(continued)