Panasonic AG-CPD15P - Page 121

121
Troubleshooting and Reference
Error messages
(continued)
No. Message Measure
E28402
All USB storages are read only.
Couldn’t start export.
Connect a write-enabled USB memory
device.
E28403 Media error.
Export is incomplete.
Replace the P2 card or the USB
memory device.
E28404 USB storage file system error.
Couldn’t start export.
Replace the USB memory device.
E28405 USB storage write error.
Export is incomplete.
E28406 Found update file in USB
storages.
Couldn’t start export.
Delete the update file on the USB
memory device.
E28407 No P2 cards.
Couldn’t start export.
Insert a P2 card with recorded files.
E28408
Found unformatted P2 cards.
Couldn’t start export.
Insert a formatted P2 card with data
stored on it.
E28409 Couldn’t start export. Replace the P2 card with another one.
E28499 System error.
Export is incomplete.
Reboot this unit.
E28880 USB storage was ejected.
Export is incomplete.
Do not remove the USB memory device
while exporting data. Reconnect the
USB memory device and export again.
E28881 USB storage was inserted.
Export is incomplete.
Export the data again.