Panasonic AG-CX350 - Page 79

– 79 –
Chapter 4 Operation — Menu settings
The items that can be set are as follows.
f [−63]…[63]
[G-Yl-Yl] ([SAT])
Corrects the color saturation between “colors between green and yellow” and yellow.
The items that can be set are as follows.
f [−63]…[63]
[G-Yl-Yl] ([PHASE])
Corrects the hue between “colors between green and yellow” and yellow.
The items that can be set are as follows.
f [−63]…[63]
[Yl] ([SAT])
Corrects yellow color saturation.
The items that can be set are as follows.
f [−63]…[63]
[Yl] ([PHASE])
Corrects the yellow hue.
The items that can be set are as follows.
f [−63]…[63]
[Yl-Yl-R] ([SAT])
Corrects the color saturation between yellow and “colors between yellow and red”.
The items that can be set are as follows.
f [−63]…[63]
[Yl-Yl-R] ([PHASE])
Corrects the hue between yellow and “colors between yellow and red”.
The items that can be set are as follows.
f [−63]…[63]
[Yl-R] ([SAT])
Corrects the color saturation between yellow and red.
The items that can be set are as follows.
f [−63]…[63]
[Yl-R] ([PHASE])
Corrects the hue between yellow and red.
The items that can be set are as follows.
f [−63]…[63]
[Yl-R-R] ([SAT])
Corrects the color saturation between “colors between yellow and red” and red.
The items that can be set are as follows.
f [−63]…[63]
[Yl-R-R] ([PHASE])
Corrects the hue between “colors between yellow and red” and red.
The items that can be set are as follows.
f [−63]…[63]
[MASTER PED]
Sets the master pedestal.
The items that can be set are as follows.
f [−200]…[200]
@@
NOTE
t This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[RGB BLACK CONTROL SETTING]
This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[R PED]
Sets the Rch pedestal level.
The items that can be set are as follows.
f [−100]…[100]