Panasonic AG-CX350

– 80 –
Chapter 4 Operation — Menu settings
[G PED]
Sets the Gch pedestal level.
The items that can be set are as follows.
f [−100]…[100]
[B PED]
Sets the Bch pedestal level.
The items that can be set are as follows.
f [−100]…[100]
[PEDESTAL OFFSET]
Sets the Rch, Gch, and Bch pedestal levels after adjusting the automatic black balance.
[ON] Keeps each of the values set in [R PED], [G PED], and [B PED].
[OFF] Sets the pedestal level of Rch, Gch, and Bch to [0].
[GAMMA MODE SEL]
Selects the gamma mode.
[HD] Sets the gamma characteristics for HD (High Denition).
[SD] Increases gain in darker areas more than HD gamma.
[FILMLIKE1] Sets the characteristics that reproduce more highlight areas compared to HD gamma.
[FILMLIKE2] Sets the characteristics that reproduce more highlight areas compared to [FILMLIKE1].
[FILMLIKE3] Sets the characteristics that reproduce more highlight areas compared to [FILMLIKE2].
[FILM‑REC] Sets the cine gamma characteristics for lm.
[VIDEO‑REC] Sets the cine gamma characteristics for video.
[HLG] Sets the hybrid log gamma (HLG) characteristics.
@@
NOTE
t This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[GAMMA SETTING]
This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[MASTER GAMMA]
Sets the master gamma in 0.01 steps.
The items that can be set are as follows.
f [0.30]…[0.75]
[F-REC DYNAMIC LVL]
When [FILM-REC] is selected in [GAMMA MODE SEL], dynamic range is set.
No settings are changed if an item other than [FILM-REC] is selected.
The items that can be set are as follows.
f [200%] … [600%] (100% step)
[F-REC BLACK STR LVL]
When [FILM-REC] is selected in [GAMMA MODE SEL], black stretch is set.
No settings are changed if an item other than [FILM-REC] is selected.
The items that can be set are as follows.
f [0%]…[30%]
[V-REC KNEE SLOPE]
When [VIDEO-REC] is selected in [GAMMA MODE SEL], knee slope is set.
No settings are changed if an item other than [VIDEO-REC] is selected.
The items that can be set are as follows.
f [150%] … [500%] (50% step)
[V-REC KNEE POINT]
When [VIDEO-REC] is selected in [GAMMA MODE SEL], knee point is set.
No settings are changed if an item other than [VIDEO-REC] is selected.
The items that can be set are as follows.
f [30%]…[107%]
[BLACK GAMMA]
Sets the gamma curves of dark areas.
[−8]…[−1]
Compresses the dark area.
[0] Standard state
[1]…[8] Expands dark areas.