Panasonic AG-DVX200 - Panasonic AG-DVX200 Record Mode Settings; Panasonic AG-DVX200 Audio Input Settings

10
2-2. Record mode settings
Set the record file format type, frequency, etc. with MENU > “SYSTEM MODE” where the following
menu items are available.
MENU > SYSTEM MODE
- SYSTEM FREQ : 59.94Hz or 50.00Hz
- OUTPUT BITS : 4:2:2 8bit (*)
- REC MODE : MOV, MP4 or AVCHD
- REC FORMAT : Choose a combination of the number of pixels and bitrate （see P. 61）
* By choosing “4:2:2 10bit” output mode, superb images can be recorded from the HDMI OUT or
SDI OUT using external recorders. When “4:2:2 10bit” mode is chosen, built-in SD memory
card recorder does not work.
2-3. Audio input settings
The AG-DVX200 can handle up to 2 channels of audio and record them.
1. Set switches (A) for audio source selection (built-in MIC / external)
2. When external input is chosen, set attenuation type (LINE, MIC) and phantom powering option
with switches (B). Input levels for LINE and MIC inputs can be set with MENU > AUDIO
SETUP.
3. Set record level adjustment (AUTO / MANUAL) with switches (C).
Audio record level can be set with the AUDIO LEVEL knob when (C) is set to MANU (MANUAL).
(A)
(C)
(B)
2. Preparation before shooting
Audio level meter
AUDIO LEVEL CH1 / CH2 knob