Panasonic AG-DVX200 - Panasonic AG-DVX200 SCENE FILE Menu

14
SCENE FILE
Note: Items marked  will not function when OUTPUT BIT item is set to “4:2:2 10bit”.
Menu item
Description
Value (Factory default setting underlined)
CUSTOMIZE SCENE
Recall scene files.
SCENE1 - SCENE6
SCENE FILE
Load / Save custom scene
files to/from SD memory
cards.
LOAD / SAVE
 VFR MODE
Turn ON/OFF variable frame
record mode.
ON / OFF
FRAME RATE
Adjust frame rate. Adjustable
range is from 2fps to 120fps
60fps
SYNCHRO SCAN
Set shutter speed for synchro
scan mode.
Adjustable range varies depending
on system frequency setting.
MASTER DETAIL
Adjust image contour
correction level for entire
image.
-31 - 0 - +31
DETAIL CORING
Adjust threshold level of image
contour correction.
0 - 1 - 60
SKIN TONE DETAIL
Adjust level of softness effect
for a certain color tone (flesh
tone).
ON / OFF
V DETAIL LEVEL
Adjust image contour
correction level for vertical
direction.
-7 - 0 - +7
KNEE APE LEVEL
Set KNEE compression level
for a very bright part.
0, 1, 2, 3, 4, 5
RB GAIN CONTROL
SETTING
Adjust color balance for each
white balance memory position
(A, B and PRST).
This item does not function
when white balance mode is
set to “ATW”.
R GAIN: -30 - 0 - +30
B GAIN: -30 - 0 - +30
GAIN OFFSET: ON / OFF
CHROMA LEVEL
Adjust saturation of color.
-70 - 0 - +30
CHROMA PHASE
Adjust tone of color.
-31 - 0 - +31
MATRIX
Recall color presets.
NORM1: Suitable for shooting
outdoors or indoors under halogen
lighting.
NORM2: Color is slightly more vivid
than “NORM1”.
FLUO: Suitable for shooting indoors
under fluorescent lighting.
CINE-LIKE: Suitable for shooting
with cinema-like image.
COLOR
CORRECTION
SETTING
Adjust color tone and
saturation. This has an effect
on 16 different individual color
phases.
-63 - 0 - +63
MASTER PED
Adjust master black level
-150 - 0 - +150
3. MENU settings