Panasonic AG-DVX200 - Panasonic AG-DVX200 RECORDING SETUP Menu

24
RECORDING SETUP
Note: Items marked  will not function when OUTPUT BIT item is set to “4:2:2 10bit”.
Menu item
Description
Value (Factory default setting underlined)
MEDIA SELECT
Select the media slot for
recording.
SD CARD1 / SD CARD2
2SLOT FUNC.
Set the record mode, which
uses dual memory card slots.
OFF / RELAY / SIMULTANEOUS /
BACKGROUND / DUAL CODEC
See P. 33 for the details.

DUAL CODEC REC
Select the codec for sub
recording. Available in DUAL
CODEC mode only.
FHD 50Mbps / FHD 8Mbps
INTERVAL REC
Set record interval time (pause
time) of time-lapse recording.
OFF / 1SEC / 10SEC / 30SEC /
1MUTE / 2MUTES
PRE-REC
Turn ON/OFF the pre-record
mode. This mode allows the
camera to start recording the
video and audio (approx. 4 sec
in the MOV/MP4 mode, 3 sec in
the AVCHD modes) before the
REC button is pressed.
ON / OFF
INFRARED REC
Turn ON/OFF the infrared
record mode, allowing image
capture in dark locations.
ON / OFF
FOCUS
TRANSITION
Register positions for focus
transition function. (See P.38)
SET / OFF
FOCUS
TRANSITION TIME
Set transition time from one
position to another.
Direct / 2 – 15sec / 20sec / 30sec /
45sec / 60sec / 90sec
FOCUS
TRANSITION REC
Execute the focus transition
function as soon as REC button
is pressed. This menu item
selects which position to start
with.
1 / 2 / 3 / OFF
FOCUS
TRANSITION WAIT
Set pause time until focus
transition starts.
0sec / 5sec / 10sec
TIME STAMP
Allows recording of
superimposed date and time on
the image.
ON / OFF
DF MODE
Set timecode drop frame mode.
DF / NDF
Enabled only when system frequency
setting is 59.94Hz.
TCG
Set timecode count mode.
FREE RUN / REC RUN
TC PRESET
Set initial value of timecode.
--
UB PRESET
Set value of users bit
--
Enabled only when record mode is
AVCHD.
EXT TC LINK
This item is for timecode
synchronization for
multi-camera recording
purpose. (see P.35)
MASTER / SLAVE
3. MENU settings